Used Costa Sanders K6 - WCCC 1350
Used Costa Sanders K6 - WCCC 1350 is backordered and will ship as soon as it is back in stock.
Used Costa Sanders K6 WCCC 1350
Equipped with the following working units: W1 + C25 + C25 + C25
General technical data:
| Useful working width | 1350 mm |
| Longitudinal sanding belt length | 2620 mm |
| Width of longitudinal sanding belts to obtain maximum working width | W. + mm 30 |
| Sanding belt introduction side (standard) | Left hand |
| Standard working thickness | mm 3÷160 |
1st Working unit:
| Sectioned infeed pressure unit with "lips" , to hold work pieces of different thickness on the feed belt; positioned in front of first working unit; sections with pitch mm 65, equipped with pneumatic pressure control for the complete unit. | |
| W1 - Planer head unit - fix - head ø mm 180 - with 8 rows of cutters; disposable carbide inserts mm 14x14x2 - infeed sectioned pressure unit; anti kick-back safeties. NOTE: - thickness of work-pieces with W unit not less than | mm 8 |
| WDA - Disposable carbide inserts with 4 positions of utilization, thickness mm 2, dimensions | mm 14 x 14 |
| W-set - for the pneumatic positioning of the planer head W180 in working position on or off. | |
| Motor with one speed of rotation, with power | kW 30 |
2nd Working unit:
| C25 - Working unit with cylinder ø mm 250 - Complete with: sanding belt tensioning unit; electronic oscillation; dust hoods; safety systems. It includes an eccentric mechanism to compensate the thickness variation of the abrasive belt. | |
| Cylinder with rubber surface and helicoidal grooves for cooling, hardness | Sh 80 |
| Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. | |
| Motor with one speed of rotation, with power | kW 22 |
| Cutting speed of sanding belt | m/s 18 |
| B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood | |
| M-Lock - Manual locking system of the working unit to the machine frame. | |
3rd Working unit:
| C25 - Working unit with cylinder ø mm 250 - Complete with: sanding belt tensioning unit; electronic oscillation; dust hoods; safety systems. It includes an eccentric mechanism to compensate the thickness variation of the abrasive belt. | |
| Cylinder with rubber surface and helicoidal grooves for cooling, hardness | Sh 50 |
| Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. | |
| Motor with one speed of rotation, with power | kW 18,5 |
| Cutting speed of sanding belt | m/s 18 |
| B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood | |
| M-Lock - Manual locking system of the working unit to the machine frame. | |
4th Working unit:
| C25 - Working unit with cylinder ø mm 250 - Complete with: sanding belt tensioning unit; electronic oscillation; dust hoods; safety systems. It includes an eccentric mechanism to compensate the thickness variation of the abrasive belt. | |
| Cylinder with rubber surface and helicoidal grooves for cooling, hardness | Sh 40 |
| Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. | |
| Motor with one speed of rotation, with power | kW 15 |
| Cutting speed of sanding belt | m/s 18 |
| B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood | |
| M-Lock - Manual locking system of the working unit to the machine frame. | |
Request a Quote
Enter your email and submit a request for a quote for the
Highland Article #: 1299
Used Costa Sanders K6 - WCCC 1350
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Used machinery is sold "as is, where is" unless explicitly stated otherwise. Customers are encouraged to inspect the machine in operation before purchase. The buyer is responsible for ensuring compliance with all safety regulations, providing operator training, and covering any costs related to local safety or electrical standards and inspections.
